I’m leaving on a jet plane on a redeye tonight to the House of Mouse to do the Wine & Dine Half on Saturday. This will be my third Run Disney event of the year (Tinker Bell and Tower of Terror were the others) and I’ll be getting my 2014 Coast to Coast medal. For this run I decided to dress up as everyone’s favorite purple dragon – FIGMENT! I loved Figment since I was a kid and my stuffed Figment from back in the day kept me company while I made the outfit. For those of you who may not be familiar with Figment, he is a character from the Journey into Imagination ride. When the ride was redone to go thru the Imagination Institute Figment was originally left out and then added back in when people complained. When Epcot opened there were no Disney characters (from films or the fab 5) there so Figment was really the only character in the park.
Dreamfinder & Figment:
And here is my costume. Well, the majority of my costume anyway. I will also be wearing purple compression socks and purple arm warmers:
For the costume I found the visor on Ebay (it was park merch that was retired). I made the sparkle skirt using the tutorial I found on Pinterest (there is a link in one of my previous blog posts). I had to buy the fabric online as I couldn’t find light purple in any stores around here. Remember if you making a skirt with the Confetti Dot fabric to sew thru strips of wax paper to prevent the sewing machine needle from getting gummed up and jammed. I couldn’t find a yellow/red tee so I bought a white tee with red trim and dyed it yellow. Then did the name with an iron-on transfer. Last pieces were the tail and wings, which were both made out of felt. The wings also have a layer of batting between the two pieces of felt to give them more structure. The tail was sewn with a loop/pocket on the top and I just threaded my race belt thru to make it easy to attach.
I love this costume and am now just praying for no rain during the run! What is everyone dressing up as for W&D?
I hate that organized rides and runs always just have boxy unisex shirts. I don’t wear them so usually end up getting size large and passing them off to my dad to wear. There are some events that I keep them from but still never wear so I’ve been looking for ideas to repurpose them. Made one into a halter top and one into a loose workout tank, they worked in concept but the result was very meh on, so that was kind of a bust. Third times the charm because this result I’m happy with – a cute drawstring bag made from my Disneyland Half shirt from last year.
I used some other drawstring bags I had from past events as a basic concept pattern. (And yes, the bag they gave me at Tinkerbell was printed upside down. Doh!).
1. First cut the top off the shirt right across at the collar. I actually left some of the collar knowing it would be hidden so I could get the design lower on the bag. Cut bottom off shirt to get your desired bag height. I cut off about 3″ here. I also cut off the sleeves.
2. Stitch up both sides, I went 3″ from the side of the shirt, but you can do whatever width you want your bag. Only stitch up to about 1-1/2 inches from the top of the shirt. That will fold down to make the pocket for the drawstring. Sew bottom seam. I did two lines of stitching side by side on every seam on this project to provide more stability since I tend to stuff bags. Cut excess fabric off the sides. It should kind of look like a pillowcase at this point.
3. With the bag still inside out, fold down the flaps on the top of the shirt and stitch down. Do each side separately so there is a gap between the two sides.
4. Stitch across the bottom corners of the bag to reinforce. I then used a grommet gun to add the grommets. You can get one at fabric stores, I’ve had this one forever. If you are doing grommets cut the hole in the fabric first and push the grommet piece thru before clamping with the gun. Forgot about that on my first attempt and the grommet popped off. If you don’t want to deal with the grommets you can just sew the string directly into the side seams, it just won’t be adjustable.
5. Take 2 lengths of cord about 1-1/2 to 2 yards each. Weave the first around the top from the right side. Weave the second around from the left. I used the cord from an old thrashed bag I got at a ride years ago but you can also buy it at fabric store by the yard.
6. Pull both ends of the cord thru the grommets and knot on the back of the bag. Pull the strings and viola, backpack!
I finished up my top for my Tower of Terror 10-miler costume last night. Oh, and remember how I said in an earlier post that I wasn’t going to rip apart the skirt and start again? Yeah, you didn’t think that was actually going to happen did you? So, I also redid the waistband on the skirt. It’s still not particularly flattering but it’s a hundred times better than it was. Just have to finalize the headwear and that costume is done. Yay!
The components of my Wine & Dine costume have arrived, putting that together is next on the list. I also figured out my costume themes for the Dopey Challenge 5K, 10K and half. Still not sure about the marathon or either Star Wars runs yet.
My other costume accomplishment was my first attempt at a Confetti Dot Fabric sparkle skirt. I used the tutorial at Beauty Still Remains. It’s a great tutorial, and the skirt is easy peasy to make. But here’s the thing you need to know about this fabric, it’s the devil. The glue holding the sequins to the fabric gum up the sewing machine needle something fierce and the thread misses, splits, bunches, etc. I may or may not have yelled at my sewing machine a few times. I finally stopped and did some googling and discovered a secret weapon. Wax paper!! Put a strip of plain old wax paper on top of the fabric and sew the seam right thru it. No more issues at all! The paper rips away from the stitching easily with no mess. With the wax paper method you can make the skirt in under 30 minutes. I fought with my machine for over an hour on the first half before discovering the wax paper method. Next skirt I’ll make the waistband a little smaller but overall I like it.
Last night I spent 2 hours making the skirt portion of my costume for the Twilight Zone Tower of Terror 10-Miler. Yup, that’s right, I spent 2 hours on something that should have taken 15 minutes. And I don’t like the way it came out. Wah wah waaaah. I’m all thrown off on the costume for this run now. You see I assumed it would be cooler since it’s a night run and had plotted out a costume with long sleeves (wicking running fabric, but still long sleeves). Then in reading race recaps realized I needed to plan for 70s and humid. So there went my initial plans for the top. Then last night I literally spent an hour contemplating whether or not to put a contrasting waistband on the skirt. Well, I need the contrast for this costume, but if I make it all the one color I may be able to use it for a future costume, but then this one won’t look as good, etc, etc, etc, you get the idea. After all that I went with the contrasting waistband, but then second guessed how to cut the skirt fabric. I don’t know why I thought that random people on the interwebs would know better than me given that it was in front of me and I’ve been sewing for years, but I should have cut the shape different given the frabic I used. So the skirt is OK and will work but it’s definitely far from being the most flattering thing. It is poofy and bell shaped, so it makes my ass and waist look ginormous (the drape is why I should have cut it different). Hey, it will make me easy to spot on the run I guess. I decided to move forward with making the top to see if that makes the skirt look better and to try to refrain from ripping it apart and starting again.
These were projects that I did last weekend. People asking me how to do them was one of the motivations for this blog. Unfortunately that came after I actually did them, so no in process pics. But figured I’d post the steps anyway since it was super easy.
- Buy blank wood plaque and signs from Joanns (there were good coupons!)
- Paint the wood. I used leftover paint from my house and DIY projects. Yup, all those bright colors are in my house, no boring beige for me. Let the paint dry.
- Squeeze a bit of brown craft paint (or any brown paint, I’ve used porch/floor paint before) into a red party cup, add some water and stir. You basically want dark brown water. Paint the watered down paint all over the painted wood pieces, let sit for a minute and lightly wipe it with a damp cloth. This gives it an aged look. Let dry.
- Cut out a 8-1/2 x 11” piece of tissue paper from the standard gift wrapping folds and tape it to a piece of cardstock. Run it thru the printer and print whatever text/picture/font you want to include on your sign directly onto the tissue then take it off the cardstock.
- Cut out the words/pic on the tissue paper as close as you can get to the ink.
- Put a layer of Mod Podge on the wood, then lay down the tissue paper where you want it. This first layer is key, forget it and you totally see the tissue paper. I may or may not have made that mistake and had to sand the wood and start again. 😛
- Coat the top of the tissue paper and entire surface of the wood a few times with Mod Podge and let dry.
- Distress if you want using sand paper, chain, hammer, etc
- For the bib holder I added two little cup hooks to hang all the race bibs on
- Hang and enjoy!
RunDisney Bib Holder:
Bicycle Signs (one for me, one will be a gift):